Tough Coat Clear Finish - Fusion Mineral Paint


Product Description

Fusion Tough Coat uses only 100% acrylic and is perfect as a top coat sealer for those high traffic surfaces, such as table tops, seating, seating, doors and floors, and dries to a matte finish. Fusion Tough Coat differs from other finishing coats or varnishes with its use of pure acrylic. Normally other products on the market use lesser acrylic resins, which will yellow and embrittle over time, not binding as well and leaving a less durable finish.

Apply Fusion Tough Coat with a brush onto recently painted or clean, non-oily/greasy surfaces. If applying to a recently painted surface, allow the surface to dry 12 hours before applying. For maximum durability, apply two coats, waiting 2-4 hours between coats. In humid areas, longer drying times may be required. Clean up with soap and warm water.

Be sure to gently mix your Tough Coat prior to use, as the matting agent and other ingredients may settle to the bottom. Do not shake vigorously as this will cause air bubbles in your piece, which are difficult to remove once applied.


You may also like